Sony MDR-ZX330BT Bluetooth Wireless Headphones with NFC Connectivity - Black

Product Information

Use the supplied micro-USB cable only, and connect directly to a computer. Charging will not be completed properly by an indirect connection, such as via a USB hub.

Do not put weight or pressure on this headset as it may cause the headset to deform during long storage. Due to the characteristic of BLUETOOTH wireless technology, the sound played on this unit is slightly delayed from the sound played on the BLUETOOTH device during talking on the telephone or listening to the music. The headset can be paired with multiple devices, but can only play music from one paired device at a time. One-touch connection (NFC) with a smartphone (Android 2.3.3 or later, and less than Android 4.1) [14] A device featuring the BLUETOOTH function is required to conform to the BLUETOOTH standard specified by Bluetooth SIG, Inc. and be authenticated. Even if the connected device conforms to the above mentioned BLUETOOTH standard, some devices may not be connected or work correctly, depending on the features or specifications of the device.CONFIG_USB CONFIG_USB_ACECAD CONFIG_USB_AIPTEK CONFIG_USB_ATI_REMOTE CONFIG_USB_HID CONFIG_USB_KBD CONFIG_USB_KBTAB CONFIG_USB_MOUSE CONFIG_USB_MTOUCH CONFIG_USB_POWERMATE CONFIG_USB_WACOM CONFIG_USB_XPAD CONFIG_USB_YEALINK If you are using your Bluetooth speakers or headphones for the first time, they will most likely go into pairing mode automatically when you turn them on.

After the computer has loaded the device and the drivers for the headphones, you should see that the device has been connected successfully. Noise or sound skips may occur depending on the BLUETOOTH device connected with this unit, the communication environment or the usage environment.

NOTE: If the device name is not displayed in the Bluetooth items, there is a possibility that the Bluetooth function is set to off. Set the Bluetooth function to on. If sound quality is low when listening to music on your computer through your headphones, switch your Output device to [Headphones (WH-1000XM4 Stereo)].

If you store the headset for a long time, charge the battery to its full capacity once every 6 months to avoid over discharge.NOTE: If the device name is not displayed in the Bluetooth items, there is a possibility that the Bluetooth function is set to OFF. Set the Bluetooth function to ON. In this case, delete the pairing information of the headset from the BLUETOOTH device, and then pair them again. If you have previously connected the headset to this BLUETOOTH device, only an HFP/HSP BLUETOOTH connection may be made when the headset is turned on. If this happens, use the BLUETOOTH device and make an A2DP BLUETOOTH connection.