Makita DMR110 Li-ion DAB/DAB+ Job Site Radio - Batteries and Charger Not Included

Product Information

There are eight language options available in the radio: English, German, Italian, French, Dutch, Danish, Norwegian, and Polish. Rotate the Volume/Tuning Control/Select knob to choose "Yes". Press the Volume/Tuning Control/ Select knob to confirm the setting and a full reset will be performed. Batteries: 7.2v Cluster / 10.8v/12v Max CXT / 14.4v/18v LXT Li-Ion Batteries (Excluding Makita 'G' Batteries)

For preparation of the item being shipped, consulting an expert for hazardous material is required. Please also observe possibly more detailed national regulations. DAB display: station name, program type, multiplex name, time/date, frequency, bit rate/audio type and signal strength Connect a stereo or mono source (i.e. iPod, MP3, or CD player) to either AUX IN 1 or AUX IN 2 by audio cord.

THIS PRODUCT IS NO LONGER AVAILABLE

Select the desired waveband by pressing the Band button. Make sure the soft bended rod antenna has been well placed for best FM reception. Try to avoid operating the radio next to a computer screen and other equipment which will cause interference to the radio. Press the Info button to cycle through the various options shown in the following letters (a. to g.). Stations stored in the preset memories can be overwritten by following the procedures described above.

In this guide, you will find all the information you need to install the new software. System requirements Press the Advanced setting button and rotate the Volume/Tuning Control/Select knob until "Station List" is flashing on the screen. Press the Volume/Tuning Control/Select knob to enter the list of the stations. The following show the symbols used for the equipment. Be sure that you understand their meaning before use.

Makita DMR110 18v LXT / 12v MAX CXT DAB+ Digital Job Site Radio 

Rotate the Volume/Tuning Control/Select knob to get the desired sound level. The LCD display will show sound level changes. This radio has three tuning methods- Scan tuning, Manual tuning and Memory presets recall. Selecting a station - DAB Rotate the Volume/Tuning Control/Select knob to choose your desired language. Press the Volume/ Tuning Control/Select knob to confirm your setting.

Under System Type, see if you are using a 32-bit or 64-bit. If you are using a 64-bit version, you will need another computer for the update. SW Version" shown on the display. Press the Volume/ Tuning Control/Select knob to view the software version installed in the radio.From time to time, new DAB radio stations may become available. Or you may have moved to a different part of the country. In this case you may need to activate your radio to scan for new stations. Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. Once you have verified that you have a compatible operating system, follow this step-by-step guide:

Your radio will perform a full scan of the DAB frequencies. As new stations are found, the station counter on the left side in the display will increase and stations will be added to the list. Bit rate/Audio type Indicates the digital audio bit rate and audio type for the currently tuned DAB station. Batteries: 10.8v Cluster / 10.8v/12v Max CXT / 14.4v/18v LXT Li-Ion Batteries (Excluding Makita 'G' Batteries) If your device has version V4.3.17-1C02E installed, you can follow the steps and install the update. Press “Advanced” again and turn the volume control 2 times to the left and confirm the input at “Software Upgrade”. When using FM mode, your radio can be set to scan either local stations or to scan all stations including distant radio stations. Manual Tuning – FM

Press the Advanced setting button and rotate the Volume/Tuning Control/Select knob until "DRC Value" shown on the display. Then press the Volume/Tuning Control/Select knob to enter the setting. The display will show the current DRC value. To allow the radio to find the available stations, it is recommended to carry out a full scan of the entire DAB Band III frequencies. Keep rotating the Volume/Tuning Control/Select knob until desired frequency is shown on the display. Press the Auto tune button and the radio will search and stop automatically when it finds a radio station. The radio will continue searching for the next available station unless the operator presses the Auto tune button to stop the scanning.